ACT-727
The MIPRO ACT-727 is a Professional analog 2-channel true diversity broadband receiver, 19" metal housing, VFD display, ACT function, internal switching power supply, 400 preset frequencies.
Frequency area: 482-554 MHz (5UA), 554-626 MHz (5UB)
The ACT 700 series is robust and can be flexibly and professionally used in a variety of applications.
The 2-channel receiver comes in a rugged 1U EIA standard 19" metal case.
The industry's only bright color VFD (Vacuum Fluorescent Display) offers a wide viewing angle to the high-contrast, crystal-clear display of all parameters.
With further improved 3rd generation RF and IF circuitry, the receivers provide excellent and superior audio and radio quality.
The ACT-700 series combines professional features, user-friendly operation and excellent quality at an affordable price.
The two- and four-channel receivers can also be equipped with the optional digital Dante TM interface
Specials
-
2-channel receiver
-
Robust heat-dissipating metal housing EIA standard 1 x 19 inch RU with perfect shielding against interfering interference
-
UHF PLL synthesizer with high stability and low spurs
-
3rd Generation Mipro: Enhanced RF filter elements and circuits for reduced sensitivity to noise and more interference free channels
-
400 Preset channels in 10 groups together with the Auto-Scan function allow fast search for trouble-free channels
-
The world's first ACT (TM) (Automatic Channel Targeting) provides accurate and fast frequency synchronization between receiver and transmitters
-
True diversity antenna system for best reception quality
-
Dual squelch setting for noise lock and pilot tone. Transmitter can be switched on / off at any time without causing disturbing noises
-
The industry's only bright color VFD (Vacuum Fluorescence Display) offers a wide viewing angle to the crystal clear display of all parameters. Automatic dimming of the display in stand-by mode
-
All settings are easy and intuitive with a single knob
-
Set the reception sensitivity via the interference warning display. Higher sensitivity for wider reception, low sensitivity to reduce noise
-
Output signal can be tapped via 3 levels as a single or total signal. The output level is matched with the sensitivity of the microphone capsule and ensures optimal performance
-
TNC antenna connectors with 8V power supply (for example for optional boosters)
-
PC - control software for real-time control and monitoring
-
The two- and four-channel receivers can also be equipped with the optional digital Dante TM interface
-
Internal switching power supply for a stable power supply of 100 ~ 240V AC
Technical Details
ACT-727
| Antennas |
True diversity |
| Bandwidth |
24 MHz (mid gap 10 MHz) |
| Channel |
2-channel |
| Connections |
Balanced XLR connector |
| Dimensions (WxHxD) |
482 × 44 × 265 mm (19 × 1.7 × 10.5") |
| Display |
Colored VFD (Vacuum Fluorescence Display) shows Frequency Code, RF & Audio Level, Transmitter Battery Indicator, Diversity Signals, Interference Warning Indicator. Programmable user name, group, channel, squelch level, PC address and lock status |
| Frequency range |
482-554 MHz (5UA)
554-626 MHz (5UB) |
| Frequency response |
50 Hz - 18 kHz, with high-pass filter |
| Frequency setup |
104 selectable channels (ML 44 channels, Max. 8 compatible);
Group 01-06> 8 compatible channels;
Group 07-08> 12 compatible channels;
Group 09-10> 16 compatible channels |
| Frequency stability |
+/- 0.005% (-10 - 50° C) |
| Housing (metal) |
EIA standard 19" 1U |
| Max. Output power |
Balanced: + 16dBV / 0dBV / - 6dB;
Unbalanced: + 10dBV / 0dBV / - 6dB |
| Operation |
Manual or PC controlled via optional control software |
| Output |
Single and sum signal |
| Output signal strength |
Output level is matched with the sensitivity of the microphone capsule and ensures optimal performance |
| Power supply |
Internal switching power supply 100 ~ 240V AC |
| Sensitivity |
6 dBμV, with signal-to-noise ratio> 80 dB, 40 kHz deviation |
| Signal to Noise Ratio |
> 105 dB (A) |
| Squelch |
Dual squelch adjustment for noise lock and pilot tone |
| THD |
<0.5% at 1kHz |
| Transmitter fits (sold separately) |
ACT-72HC hand transmitter or ACT-72TC bodypack transmitter |
| Tuner procedure |
PLL Synthesized |
| Weight |
Approximately 3.0 kg (6.6 lbs) |
There are no reviews yet.
