Frequency area: 823 - 832 MHz. Color: black.
Output power: 500 W RMS amplifier (@ 8 Ohm); (program): 1.000 W.
The active, wireless 10" 2-way speaker MA-P10 is a universal broadband speaker.
The built-in 2-channel wireless module and built-in MP3 player allow many different applications and facilitate the construction and dismantling.
Thanks to the innovative DSP technology (digital audio processing), all audio signals are processed precisely and the power, the signal strength, the phase position and the limiters are constantly monitored.
In addition, the loudspeaker features an adjustable digital delay line (0 to 100 meters).
The MA-P10 has a high-quality wooden cabinet, very precise speaker drivers and a digital Class-D amplifier with a peak power of up to 1,000 W.
Up to 1,000 W peak power
Class-D, bi-amped power output stage
Powerful DSP with state-of-the-art DTA2© technology.
The DTA2© Digital Runtime Adaptation Algorithm provides 100% tuned, time-aligned and synchronized signals. DTA2© combines the signals of the woofer and the tweeter to a homogeneous acoustic signal over the entire bandwidth
IDSE© Intelligent Digital Sound Editor (on-board optimization).
The powerful IDSE© (Intelligent Digital Sound Editor) enables effective sound adjustment in the speaker itself. The editor includes a 3-band equalizer (+/- 12dB), global master tuning presets, adjustable low-pass filters at 80Hz, 100Hz, 120Hz and 150Hz and an adjustable digital delay line from 0 to 100 meters
DBL© Dual-Band Limiter for balanced and stable playback
Easy operation with EASY CONTROL DSP interface
Global master tuning presets and adjustable high pass filters
Bluetooth interface for easy transfer of music via mobile phone, laptop, I-pad or similar Bluetooth-enabled audio devices
Combo XLR input (XLR / 6.3 mm jack with MIC / LINE switch)
Robust, textured lacquered birch plywood casing (black or white)
Sophisticated and very precise high and low frequency drivers
Extra-wide 90° beam angle for broad sound emission
15 mm birch plywood, with textured finish, color: black or white
Active / DSP
300mm x 544mm x 290mm
90 ° x 60 ° nominal (HxV)
DSP audio processing
3-band EQ with programmed presets, Digital Delay Line (adjustable 0.00 - 100.00 meters), Dual-Band Limiter, Digital Time Alignment latest generation, adjustable Low Cut Filter
-10 dB: 46 Hz - 22 KHz; +/- 3 dB: 50 Hz - 20 kHz
Powder-coated black perforated steel with acoustically transparent foam
HF Driver (Horn)
1 x NOVA T400, 1.75 "voice coil comp. driver, impedance: 8 ohm, rotatably mounted
1 x XLR / 6.3 mm combi jack, Mic / Line level in the amplifier module;
1 x 6.5 mm jack, mic level on the radio module;
1 x 3.5 mm mini-jack, line level on the radio module
2 x UHF input channels, high-end audio, Switching bandwidth 24 MHz,
Frequency range 823 - 832 MHz;
1 x Bluetooth (2.4 GHz) Basic Audio
1 x 10" NOVA 10/300 (2.5'' voice coil), impedance: 8 ohms
127 dB SPL peak
35 mm tripod flange, 16 x M8 suspension points, 2 x M10 for mounting bracket, 4 x rubber bottom
500 W RMS amplifier (@ 8 ohms); (Program): 1,000 W
1 x XLR Pre-DSP Main Mix Out on the Amplifier Module;
1 x 3.5 mm mini jack line-out on the radio module
Built-in switching power supply 100 - 240V AC
Active digital class-D bi-amping amplifier with 10'' 2-way speaker and passive ventilation
integrated handle above