VIS-DCP2000-W

Item no.: 103465735
Category: Conference Systems
Manufacturer:

Digital control center for wireless and wired conference systems with DSP signal processing. Supports functions such as channel selection, voting and camera work.

2.299,00 €

incl. 19% VAT ,

Delivery time: 2 - 3 Workdays (DE - int. shipments may differ)

units

note_phoenix

VIS-DCP2000-W

The VIS-DCP2000-W is a digital control center for wireless and wired conference systems with DSP signal processing.

Supports functions such as channel selection, voting and camera work.

The VIS-DCP2000-W meets all the requirements of a modern wireless control center with numerous network and DSP functions. It is easy to install and can be controlled either directly on the device itself or with software via PC.

A maximum of 240 wireless microphone units can be operated with one control center, with up to four wireless microphone units active simultaneously.

The wireless network is Wi-Fi IEEE 802.11n compatible.

In a conference system with a VIS-DCP2000-W conference center, both wired and wireless microphone units can be operated together as required.

A CAT5e network cable transmits 64 audio channels and additional control information. The system detects all connected microphone units and assigns each unit a unique address (ID) to avoid network conflicts.

The hot-plug function allows microphone units to be added or removed during active operation. The ability to set up the wired network as a closed loop increases reliability.

The AUDIO-LINK ring network technology guarantees interference-free signal transmission.

Optional expansion signal distributors increase the maximum number of usable wired conference units to up to 5,200.

Setup and conference operation are also possible without a connected computer.

The control center enables audio recordings directly to a USB flash drive via the integrated USB interface.

The VIS-DCP2000-W is equipped with a headphone jack (3.5 mm jack) on the front panel, 2 audio inputs with XLR and RCA connectors for feeding in external audio sources, and 8 audio outputs with XLR, RCA, and Phoenix connectors for signal output to external devices, e.g., active speakers, external recording devices, or for implementing various sound zones or foreign language channels.

Also on board are an Ethernet TCP/IP network interface for connecting the control unit to an existing network or directly to a PC and two RS232 interfaces for connecting to media control or for camera control.

The VIS-DCP2000-W offers numerous setting options directly on the control panel or via software for:

Microphone unit activation
- "OPEN" mode: Each microphone unit will be activated as soon as the talk button is pressed.
- "APPLY" mode: Pressing the talk button on a microphone unit initiates an activation request. The microphone on the microphone unit lights up green, and the chairman's microphone unit indicates that an activation request is pending. The chairman can accept or reject the request. If the chairman accepts the activation request, the microphone on the affected microphone unit lights up red, and the microphone is active.
- "VOICE" mode: As soon as a microphone unit is spoken to loudly enough, the microphone is activated.
- "OVERRIDE" mode: Pressing the talk button on a microphone unit activates the microphone. At the same time, the previously active microphone unit is deactivated.
Adjusting the volume of the microphone units and the external output
Number of microphone units that can be activated simultaneously
Volume and settings of the 8 audio outputs
Simultaneous translation
Camera tracking
Network parameters

Digital signal processing with DSP allows the adjustment of various audio parameters and increases the performance and sound quality of the overall system through functions such as:

AGC (Automatic Gain Control),
AFC (Adaptive Feedback Cancelling),
AEC (Acousic Echo Cancelling),
ANC (Acoustic Noise Control).

Two AUDIO LINK ports enable digital audio transmission between different conference centers or the connection of POE speakers via the conference extension unit VIS-EXM.

Version with Dante interface available.

Compliant with standards IEC 60914 and GBT 15381-94.

note_phoenix

Specials

Control center for digital wireless and wired microphone units

Operate up to 240 wireless microphone units

Simultaneous activation of up to 4 wireless microphone units

Simple, intuitive operation, requires no extensive training

Hot-plug function: Intercom units can be added or removed during operation

AUDIO-LINK ring network technology for interference-free signal transmission

Setup and conference operation possible even without a connected computer

Control of the conference center directly on the device or via network software

Numerous setting options directly on the control center or via software (microphone unit activation, volume, activatable microphone units, simultaneous translation, camera tracking, network parameters and much more)

Excellent sound quality

48K sampling rate

Frequency response from 20 Hz to 20 kHz

Audio recordings via the integrated USB interface directly to a USB flash drive

Headphone jack (3.5 mm jack)

2 audio inputs with XLR and RCA

8 audio outputs with XLR, RCA, and Phoenix connectors

Compliant with IEC 60914 and GBT 15381-94 standards

Product safety information

Manufacturer information:

VISSONIC Deutschland ist eine Abteilung der MIPRO Germany GmbH
Kochersteinsfelder Str. 73
Baden-Württemberg
Hardthausen, Deutschland, 74239
info@vissonic.de
https://www.vissonic.de

BRAND:	VISSONIC
MODEL:	wired
TECHNOLOGY:	DSP WiFi
SERIES:	VISSONIC CLEACON-W series

note_phoenix

Technical Details

Power Supply	110 V ~ 240 V @ 50/60 Hz AC
Power Consumption in Standby Mode	12 W
Max. Power Consumption	150 W
Power Supply for Intercom Units (POE)	48 V DC
RS-232 Interface	1 x 9-pin Sub-D Female, 1 x 9-pin Sub-D Male
Ethernet Connection	RJ45
Frequency Response	20 Hz ~ 20 kHz
Total Harmonic Distortion (THD)	< 0.05%
Channel Separation	> 85 dB
Signal-to-Noise Ratio	> 80 dB
Dynamic Range	> 94 dB
Housing	Standard 19" Rack Mount
Dimensions (W x D x H)	483 x 260 x 43.6 mm
Weight	3 kg
Color	Black

note_phoenix

Downloads

VIS-DCP2000-W Datenblatt (5,3 MB)

VIS-DCP2000-W Ausschreibungstext (0,03 MB)

CLEACON-W Bedienungsanleitung (3,3 MB)

There are no reviews yet.

Accessories

VIS-AP4C

Wireless 5G WiFi access point

1.099,00 € *

VIS-CC10

Charging and storage case for 10 CLEACON-W microphone units

2.449,00 € *

VIS-CC20

Charging and storage case for 20 CLEACON-W microphone units

3.549,00 € *

VIS-CNB

Splitter box to split a network line into two

159,00 € *

VIS-EXM

Conference extension unit for splitting a network line into up to 4, including POE power supply for a maximum of 120 microphone units

839,00 € *

VIS-HL002

CAT5e F / UTP shielded network cable with RJ45 plugs, black, 2 m

9,90 € *

VIS-HL005

CAT5e F / UTP shielded network cable with RJ45 plugs, black, 5 m

18,90 € *

VIS-HL010

CAT5e F / UTP shielded network cable with RJ45 plugs, black, 10 m

24,93 € *

VIS-HL020

CAT5e F / UTP shielded network cable with RJ45 plugs, black, 20 m

69,00 € *

VIS-HL050

CAT5e F / UTP shielded network cable with RJ45 plugs, black, 50 m

169,00 € *

VIS-HL100

CAT5e F / UTP shielded network cable with RJ45 plugs, black, 100 m

319,00 € *

VIS-SPK-F

Loudspeaker installation module

159,00 € *

This might interest you too

VIS-DCP2000-D

Digital control center for wired conference systems with DSP signal processing. Supports functions such as channel selection, voting and camera tracking.

1.999,00 € *

VIS-DCP2000-D-DNT

Digital control center for wired conference systems with DSP signal processing. Supports functions such as channel selection, voting and camera tracking.

2.499,00 € *

VIS-DCP2000-R

Digital control center for wired and wireless conference systems with DSP signal processing. Supports functions such as channel selection, voting and camera work.

2.299,00 € *