ACT-828
The MIPRO ACT828 is a Digital True Diversity Broadband Wireless Dual-Receiver (2-Channel Receiver System).
Frequency area: 482-554 MHz (5UA), 554-626 MHz (5UB).
MIPRO's new ACT-800 series digital wireless systems have a superb sound quality which can handle with any wired microphone. With up to 224 preprogrammed channels plus 16 freely programmable channels, the ACT-818 and ACT-828/848 receivers with 72 MHz bandwidth ensure optimum flexibility even for larger setups.
The single-channel as well as the dual-channel receiver come in a rugged 1U EIA standard 19" metal housing.
Due to the digital signal, the audio quality of the system is independent of the transmission distance and the transmission power. The digitization (24-bit / 44.1kHz) is higher than that of a CD.
A digital 256-bit key ensures a tap-proof radio transmission. Via a digital AES EBU interface, the signal can be transmitted loss-free over long distances via a wired connection (for example, to a digital mixer).
All in all, the ACT-800 series offers crystal-clear sound for highest demands at an affordable price.
OPTIONALLY: With DANTE Interface (version: ACT-828DNT - sold separately).
Specials
-
2-channel receiver (digital)
-
Robust metal housing EIA standard 1 x 19" RU
-
Industry-Unique Bright Color VFD (Vacuum Fluorescence Display):
wide viewing angle for crystal clear display of all parameters, automatic dimming of the display in stand-by mode
-
All settings are easy and intuitive with a single knob
-
Improved RF filter elements and circuits for less sensitivity to noise.
224 pre-programmed interference-free channels plus 16 freely programmable channels
-
New digital diversity receiver technology prevents dropouts and increases coverage.
Constant digital transmission does not cause any signal attenuation due to distance
-
DigitnamicPlus technology eliminates any compression noise.
-
The unique audio A / D converter delivers 115dBA dynamic range, latency less than 2.7ms, and eliminates saturation or distortion at high, high-level frequencies
-
The Digital Audio Interface (AES / EBU) allows direct connection to digital mixing consoles and sends the signals distortion free. It ensures a stable signal-to-noise ratio, even when transmitting over longer distances
-
The optional DANTE interface enables fast and secure transmission of audio signals and parameters over a network (version: ACT-828DNT)
-
The unique 256-bit encryption guarantees secure signal transmission and protects against unauthorized listeners
-
The built-in SmartEQ provides extensive setting options, as well as 10 user presets to simulate different microphone capsules - so each artist can choose his preferred microphone
-
PC - control software for real-time control and monitoring of up to 64 receivers
-
Receiver provides supply voltage for optional antenna systems / boosters to extend reception range and increase reception stability
- The world's first ACT (Automatic Channel Targeting) provides accurate and fast frequency synchronization between receiver and transmitters
Technical Details
| Antennas |
Digital Diversity, 2 x 50 Ohm TNC connection |
| Audio compression |
2nd generation DSP inertial coding |
| Audio level |
2 settings selectable (microphone and line signal) |
| Audio sampling |
24-bit / 44.1 kHz rate |
| Bandwidth |
72 MHz |
| Channel |
dual |
| Channel spacing |
25 kHz |
| Connections |
Balanced XLR x 2 |
| DANTE (TM) Interface |
Optional (ACT-828DNT) |
| Digital anti-feedback EQ |
Activation via menu |
| Digital audio interface |
AES EBU Interface, 1 x XLR |
| Digital EQ |
10 pre-programmed settings |
| Dimensions (WxHxD) |
420 × 44 × 245 mm (16.5 × 1.7 × 9.6") |
| Display |
Colored VFD (Vacuum Fluorescence Display) |
| Encoding |
256 bits |
| Frequency range |
540-604 MHz (5F)
636-700 MHz (6E) |
| Frequency response |
20 Hz - 20 kHz (-2dB) |
| Frequenzsetup |
224 selectable channels
Group 01 ~ 02> 16 compatible channels per group
Group 03 ~ 06> 48 compatible channels per group
Group 08: 16 freely selectable channels |
| Housing (metal) |
EIA standard 19 "1 / 2U |
| Image & secondary wave suppression |
> 85 dB |
| Latency |
<2.7ms |
| PC Interface |
USB or RS-232 interface. Proprietary MIPRO ACT-BUS |
| Power supply |
Internal power supply 12-15 V DC 2A, 7.5W |
| S / N |
> 115dB (A) |
| Sensitivity |
15 dBμV, with signal-to-noise ratio > 118 dBA |
| THD |
<0.03% at 1 KHz |
| Transmitter suitable (sold separately) |
ACT-80HC hand-held transmitter, ACT-80TC bodypack transmitter, TA-80 plug-on transmitter |
| Weight |
approx. 1.8 kg |
There are no reviews yet.
