TA-80
Frequency area: 482-554 MHz (5UA), 554-626 MHz (5UB).
The small transmitter can be connected directly to all microphones with XLR plug and operated. Both dynamic and condenser microphones can be used.
The TA-80 radio transmitter is also compatible with the Phoenix Microphone Tripods / Microphone Stand Systems MEGZ-R-2, MEGZ-R-2A and MEGZ-R-5. These already have a corresponding adapter for connecting the radio transmitter.
The transmitter has a built-in phantom power that can be switched in stages of 5.12 and 48 V and supplies a supply current of up to 10 mA. When using dynamic microphones, the phantom power can be switched off.
Via the integrated LCD display and the function keys, the various parameters of the transmitter can be set and displayed.
Charging takes place either directly in the transmitter by plugging the transmitter into the optional MP-80 charger (in combination with charging adapter MPA-80) or by removing the battery and charging it externally. It is thus possible to always provide a charged spare battery and extend the service life of the transmitter as desired by quickly changing.
With a fully charged battery, the operating time is up to 12 hours. Even with the use of true condenser microphones with a phantom power of 48V and 10 mA, the operating time is still very comfortable 5 hours with one battery charge.
The plug-on transmitter is compatible with the receivers of the ACT-800 digital wireless system (ACT-818, ACT-828 and ACT-848) and housed in a lightweight but robust aluminum housing.
Specials
- Housing made of aluminum alloy
- Display: Bright LCD
- Frequency area: 482-554 MHz (5UA), 554-626 MHz (5UB)
- Bandwidth of 72 MHz
- Compatible with the receivers of the digital wireless system ACT-800
- Compatible with the Phoenix Microphone Tripods / Microphone Stand Systems MEGZ-R-2, MEGZ-R-2A and MEGZ-R-5
- Phantom power: 12V / 48V switchable. 48 V delivers up to 10 mA (phantom power is not necessary with dynamic microphones
- Microphone input: XLR balanced
- Power supply: ICR 18500 Li-ion battery
- Approximately 10 hours operating time
-
Battery operation - after use simply place in the charging station MP-80 (in combination with charging adapter MPA-80) for charging (sold separately)
TECHNOLOGY: | Digital Wireless systems 800 MHz Technology |
SERIES: | MIPRO ACT-800 series |
BRAND: | MIPRO |
Technical Details 482-554 MHz (5UA)
Antenna
Internally
Audio coding
DSP inertial coding
Bandwidth
72 MHz
Dimensions (WxHxD)
44 × 114 × 37 mm (1.7 × 4.5 × 1.5 ")
Display
Bright LCD (Liquid Crystal Display); Group, Channel, Frequency, AF Level, Low-cut, Limiter, Encryption Status, Transmitter Power, Phase, Lock Status, Mute, Battery Status & Error Messages
Frequency range
554-626 MHz (5UB)
Frequency stability
+/- 0.005% (-10 ~ + 60 ℃)
Housing
Aluminum
Input sensitivity
Switchable + 24dB to -18 dB (in 6dB increments). 0dB = microphone sensitivity
Microphone input
XLR balanced
Modulation
Digital
Operating time
Approximately 10 hours of continuous operation (at low power, without phantom power)
Phantom power
12V / 48V switchable. 48 V delivers up to 10 mA. Phantom power is not needed with dynamic microphones.
Power consumption
Approximately 120 mA (at low transmit power, without phantom power)
Power supply
ICR 18500 Li-ion battery
Spurious Emissions
- 60 dBc
Transmission power
10 mW / 50 mW switchable
Tuner method
PLL Synthesized
Weight
Approximately 165 g (5.8 oz) incl. battery