WM-1000DT

Item no.: 103466353
Category: Digital Power Amplifiers
Manufacturer:

Digital power amplifier with 1000W sinus/100V output and EQ without 24VDC. 1 U

1.769,00 €

incl. 19% VAT ,

Delivery time: 7 - 8 Workdays (DE - int. shipments may differ)

units

note_phoenix

WM-1000DT

The digital power amplifier WM-1000DT is a public address power amp with 1000W / 100V sine power and EQ. 1 U. Output power and protection circuits acc. to IEC-268-5.

The output stage has a transformer-balanced LINE input on COMBO socket 0.775V (0dB) and GND-LIFT as well as a 0dB SIGNAL-LINK on XLR.

Sound control (LF/HF EQ) and level controls are easily accessible on the front panel. All operating states are indicated by LEDs (PROTECT, POWER OK, POWER ON).

The power amplifier has a separate speaker line with 100V output and separate 5-level volume control.

The integrated protection circuit provides DC, short circuit, overheating and overload protection as well as an automatic limiter circuit. No signal distortion at the 100V output.

Attention: The WM-DT power amplifiers do not have a 24VDC emergency power supply!

The WM-DT power amplifiers are particularly suitable as additional amplifiers in conjunction with Phoenix POWERVOICE automatic mixing amplifiers series.

The amps can be used as desktop version and for 19" installation (1 U).

note_phoenix

Specials

Digital 100V power amplifier

1000W / 100V sinus output power

Transformer-balanced LINE input on COMBO socket 0.775V (0dB)

GND LIFT

0dB SIGNAL LINK to XLR

Output power and protection circuits according to IEC-268-5

LED indicator (PROTECT, POWER OK, POWER ON)

Separate speaker line (100V output, separate 5-level volume control)

Integrated protection circuit

Product safety information

Manufacturer information:

PHOENIX Professional Audio GmbH
Hermann-Oberth-Str. 12
Bayern
Bruckmühl, Deutschland, 83052
info@phoenix-pa.com
https://www.phoenix-pa.com

Item information	Value
TECHNOLOGY:	Digital
BRAND:	PHOENIX Professional Audio
MOUNTING:	19 inch (1U)
SERIES:	PHOENIX WM-DT series New Product 2025
FEATURES:	Digital Power Amplifier Class D

note_phoenix

Technical Details

19" Mounting depth	250 mm
Audio input	Combo 0dB
Audio output	XLR, 0dB
Equalization EQ	LF / HF (+/- 12dB)
Exit 1/2 (ZONE 1/2)	Yes
Frequency response	40 Hz to 22,000 Hz @ -3dB
Ground lift / limiter	Yes
Input sensitivity (LINE)	0.775 V [0dB]
Installation height	1 U
LED display	PROTECT, POWER OK, POWER ON
Weight	15.5 kg
Mounting	Table version and for 19" installation (1U)
Output impedance	1000W@100V/10 Ohm, 70V/5.0 Ohm, 4.0 Ohm
Power	1000 watts sine wave
Power supply	230VAC / 50Hz / 60Hz
Protection circuits	according to IEC-268-5
Speaker outputs, floating	100 V - 70 V - 50 V - 8 and 4 ohms, separate 100V output "SPK-ZONE-LEVEL" with 6-step control 0V to 100V, load is max. power of the amplifier
Speaker zones	1
THD	better 0.1%

note_phoenix

Downloads

WM-600DT Bedienungsanleitung >

There are no reviews yet.

Accessories

BS-165-10-AB

Wall-mounted speaker, redundant speaker construction (AB system), 2x10W / 100V, protection class: IP 54, MDF wooden housing

81,00 € *

DKL-10

Horn speaker, 10W/100V. Protection class: IP 66

86,00 € *

PHOENIX Professional Audio (Hersteller/Manufacturer)

DL-110-C

Ceiling speaker, 10 W, 100 V, 2-way system, 6 1/2" 2-way coaxial chassis

118,00 € *

K1-30

Professional directional sound columns, 30W/100V, volume control, L=600 mm, range: 95 dB@5 m, 92 dB@8 m

425,00 € *

K4-100F

Passive Directional Column Speakers,
3.5" ferrite chassis, 100 W/100 V, Freq .: 80 Hz - 18,000 Hz (-3dB), opening angle@[H]/[V]: 100/20 degrees (-6dB @ 1kHz-8kHz)

1.009,00 € *