ILA-1000

Item no.: 103464427
Category: Induction loop amplifiers
Manufacturer:

Professional induction loop amplifier, 2-point LF / HF -EQ, MLC, compressor, EN 60118-4

1.559,00 €

incl. 19% VAT ,

Delivery time: 2 - 3 Workdays (DE - int. shipments may differ)

units

note_phoenix

ILA-1000

The ILA-1000 Induction Loop Amplifier for audio transmission is widely used to provide hearing aids with inductive audio signals.

Compatible with the requirements acc. to EN 60118-4.

The induction loop amplifier was developed as a high-quality LOOP amplifier for medium induction loops. The system is characterized by its easy installation and customer-oriented operation with optimum performance.

Induction loop amplifiers are very often used in churches, cinemas, theaters, outlets, bank counters, interpreting systems or DRIVE-INs or DRIVE-THROUGHs so that hearing aid wearers can hear much better in severe acoustic conditions (background noise, reverberation, etc.) without disturbing noises.

The ILA loop amplifier is used wherever an induction transmission is installed.

The amplifier is also particularly suitable for people who need a high quality "wireless hearing aid" without having to use a real hearing aid, such as in channel interpreter systems.

USEFUL INFORMATION

Due to the inductive coupling of hearing aids, the useful signal (audio transmission) can be heard much better without disturbing noises. By transmitting an audio signal through the induction loop, an acceptable signal-to-noise ratio is achieved. A purely acoustic, direct sound transmission (between loudspeaker and hearing aid) due to reverberation and background noise substantially worsens the perception of the useful signal by the hearing aid wearer.

note_phoenix

Specials

Audio-Matrix
Compatible with the requirements acc. to EN 60118-4
Digital automatic audio signal compressor
Loop detector for automatic measurement and power matching to loop impedance
Equalization by 2-point LF / HF EQ
MLC control to correct frequency errors
All controls are recessed and provide protection against incorrect operation

BRAND:	PHOENIX Professional Audio
MOUNTING:	19 inch (1U)
TECHNOLOGY:	Induction loops
SERIES:	PHOENIX ILA series

note_phoenix

Technical Details

Audio inputs / outputs	MIC.-1, MIC.-2 / LINE, balanced on XLR, INSERT, 0 dB LINE input on JACK
Audio sensitivity	- 50 / -70 dB MIC. / 0dB LINE
Compressor / limiter	Automatic (3 dB to 33 dB)
Dimensions / color	(W) 443 mm x (H) 44 mm x (D) 205 mm, graphite, without 19" mounting bracket (1 U)
Display LEDs	Overload, Output Level (-27 dB to 0 dB), Compressor (3 dB to 33 dB), Error, Temp, Power
Dynamics / frequency response	80 Hz - 7 kHz (-1.5 dB)
Equalization	LF-EQ / HF-EQ (+/- 12 dB)
Freq. Correction at LOOP-OUT	yes, MLC regulation
Induction loops measurement	in the range 0.5 - 3.0 O
Info LOOP / AMP CONTROL	28VDC / 2A, 125VAC / 0.5A
Loop impedance	0.5 - 3.0 Ohm
LOOP Output Power	P max. 135 W
Loop Output Power	Automatic adaptation to the LOOP impedance (9.4 A max.)
Weight	about 4.2 kg
Option	90° frequency modulator, receiver ILA-E available
Phantom Power	switchable 15 VDC
Max. current consumption	300 VA
Power supply	230 VAC - 50/60 Hz
Protection circuits	Current limit (short circuit), over temperature protection, soft start
RMS current (at 1 kHz)	> 9.4 A
Temperature Monitoring	System shutdown at 92C° , system activation at 60C°
THD	< 0.25%